SVX288/PG28 Dual Vocal Wireless System

SVX288/PG28 Dual Vocal Wireless System
	Includes SVX88 Dual Diversity Receiver, and (2) PG28 Handheld Microphone Transmitters.

PG28 with SVX2 Wireless Handheld Transmitter
	Features RF Level Switch between 1mW and 10mW 2 “AA” batteries Up to 10 hours of battery life Bottom on/off switch design Anti-rolling ring on grille for PG28 Power and battery status LED 6 color rings for microphone identification

SVX88 Dual Channel Diversity Receiver
	Features Up to 8 selectable channels Up to 4 compatible systems* Antenna Switching Diversity Adjustable Squelch Level 1/4" and XLR output Available with Handheld and Lavalier system packages
.

PG28 with SVX2 Wireless Handheld Transmitter
Transmitter Type	Handheld
Dimensions	254 mm X 51 mm diameter
RF Output Power	1
Battery, endurance	10 h
Weight	270 g
Audio Input Level	–20 dBV maximum
Input Impedance	22 kΩ
RF Output (dependent on applicable country regulations)	HI power mode: 10 mW maximum LO power mode: 1 mW maximum
Weight	270 g (10.2 oz.)(without batteries)
Housing	Molded ABS
Power Requirements	2 “AA” size alkaline or rechargeable batteries

SVX88 Dual Channel Diversity Receiver
Power Supply	12 to 18 V DC @ 220 mA, supplied by external power supply
Maximum Output Level	XLR connector into 100 kΩ load: -16 dBV, 6.35 mm (1/4”) connector into 100 kΩ load: -22 dBV mW
Dimensions	32 mm X 168 mm X 104.5 mm (1.26 in. x 6.625 in. x 4.2 in.)
Weight	245 g (11.5 oz.)
Housing	Molded ABS
Audio Output Level (Ref. ±48 kHz deviation with 1 kHz tone)	XLR connector into 100 kΩ load: -16 dBV (MIC) 6.35 mm (1/4”) connector into 100 kΩ load: -22 dBV (MIC)
Output Impedance	XLR connector: 600 Ω 6.35 mm (1/4”) connector: 600 Ω
Sensitivity	–105 dBm for 12 dB SINAD, typical
Image Rejection	>50 dBm, typical
Power Requirements	12 to 18 V DC @ 130 mA, supplied by external power supply