PGXD14/93 Wireless Lavalier System

 

PGXD14_93

PGXD14/93 Wireless Lavalier System

Complete digital wireless lavalier system – includes lapel mic with omnidirectional polar pattern.

The PGX Digital Vocal Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance.
This system includes the WL93 subminiature omnidirectional condenser lavalier for natural voice reproduction and discreet placement. Also includes tie clip and windscreen.

Included: PGXD4 wireless receiver, PGXD1 bodypack transmitter, WL93 lavalier microphone, tie clip, windscreen, padded carrying case

   

 

WT_PGXD1_Bodypack_Transmitter_1

PGXD1 Bodypack Transmitter

Compact bodypack transmits wireless audio from instrument or microphone sources.

Powerful yet compact, the PGXD1 transmits wireless audio from instrument or microphone sources with pure digital clarity and rock-solid reliability..
Features
  • Rugged, compact bodypack with belt clip
  • 20 Hz – 20 kHz frequency range captures every nuance of tone
  • Power, mute, and battery status LED
  • 200 ft (60 m) operating range
  • Up to 10 hours of continuous use from 2 AA batteries
  • Recessed dial on side provides 26 dB of continuously adjustable gain
  • Lockable interface prevents accidental setting change

 

PGXD4_1

PGXD4 Wireless Receiver

The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired.

The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. that delivers strong, clean RF performance.
Features
  • 24-bit / 48kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically syncs the transmitter and receiver
  • True digital diversity for rock-solid wireless signal reliability
  • Up to 3 compatible channels per frequency band
  • 1/4" and XLR audio outputs
  • Included padded carrying case for portability and protection
   

  • Technical Data

    PGXD1 Bodypack Transmitter
    Transmitter Type Bodypack
       
    PGXD4 Wireless Receiver
    Dimensions 40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)
    Weight 289 g (10.2 oz.)
    Housing ABS
    Audio Output Level
    (ref. ± 38 kHz deviation, 1 kHz tone)         		XLR connector (into 3000 Ω load): -2.5 dBV
    1/4 inch connector (into 10000 Ω load): +10 dBV
    Impedance XLR: 50 Ω
    1/4 inch: 50 Ω
    Sensitivity -102 dBm @ 10-5 BER
    Image Rejection > 70 dB, typical
    XLR Output Impedance balanced
    Pin 1: Ground (cable shield)
    Pin 2: Audio
    Pin 3: No Audio
    Audio LED Red: 2 dB below clip, Amber: 12 dB below clip,
    Green: 50 dB below clip
    Power Requirements 12-18 Vdc at 150 mA, supplied by external power supply
    Pin Assignments XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4")
    TRS: Tip=audio, Ring=no audio,Sleeve=ground
       
       

  • Downloads

    PDF PGX Digital Wireless System User Guide
    English