BLX14R/SM35 Wireless Half-Rack Headset System

 

BLX14R-SM35

BLX14R/SM35 Wireless Half-Rack Headset System

BLX Wireless Half-Rack Headset System

Included: BLX4R single channel half-rack wireless receiver with rack mount kit; BLX1 bodypack transmitter; SM35 Headset Condenser Microphone; PS23 power supply.

 

sm35_with-foam

SM35 Performance headset condenser microphone

Headset cardioid condenser microphone for performance.

Best suited to: Vocals

Condenser Cardioid

The new SM35 headset condenser microphone from Shure gives multi-instrumentalists the freedom to express themselves without having to sacrifice the sound quality found in traditional microphones. A tight, unidirectional (cardioid) pickup pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed for superior performance on stage. Standard TA4F (TQG) connectivity seamlessly integrates into any Shure wireless bodypack system, and its availability in a number of bundled systems makes it appropriate for any stage, ranging from small clubs to large installations and arena tours. The SM35-XLR (optional) includes an inline RPM626 preamp for use in standard wired (XLR) applications.

Features
  • Wearable wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
  • Tight, unidirectional (cardioid) condenser pickup pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
  • Flexible gooseneck design allows for optimized placement to further improve source isolation
  • Lightweight and low-profile form enables comfortable, long-wearing use
  • TA4F connector compatible with any Shure wireless bodypack system
  • Included in a wide variety of Shure wireless systems, renowned for their ease of use and reliable performance
  • Locking snap-fit windscreens tame plosives, breath and wind noise for clean and intelligible sound
  • Tailored frequency response refined for clear, crisp vocal reproduction
  • Legendary Shure precision engineering for durability and performance
   

 

WT_BLX1_Bodypack_Transmitter_1

BLX1 Bodypack Transmitter

The BLX1 bodypack has a lightweight and durable design. Ergonomically designed to fit comfortably in hand, with adjustable gain control. For use with BLX Wireless systems.

The BLX1 bodypack has a lightweight and durable design. Ergonomically designed to fit comfortably in hand, with adjustable gain control. For use with BLX Wireless systems.
Features
  • Up to 14 hours of continuous use with 2 AA batteries (included)
  • Up to 300 ft (100 m) transmission radius
  • Quick and easy receiver frequency matching
  • TQG connection for use with Shure lavalier, headset, earset and instrument microphones and guitar cables
  • Toggle on/off switch
  • Adjustable gain control of 26dB (+10 to -16dB)
  • Lightweight, rugged construction  
   

 

BLX4R_1

BLX4R Single Channel Half-Rack Receiver

The BLX4R is a rugged, metal rack-mountable receiver with simple set-up and intuitive controls. One-touch QuickScan frequency selection quickly locates the best frequency, while removable antennas allow for quick antenna distribution. Rack mount kit included.

The BLX4R is a rugged, metal rack-mountable receiver with simple set-up and intuitive controls. One-touch QuickScan frequency selection quickly locates the best frequency, while removable antennas allow for quick antenna distribution. Rack mount kit included.

Features
  • One-touch QuickScan frequency selection quickly locates the best open frequency (in case of interference)
  • Up to 12 compatible systems per frequency band (region-dependent)
  • XLR and ¼” output connectors
  • Adjustable audio output level
  • Removable antennas for quick antenna setup
  • LCD Display with detailed RF and audio metering
  • Rack mount kit included
  • Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
   

  • Technical Data

    SM35 Performance Headset Condenser Microphone
    Transducer Type Condenser
    Polar Pattern Cardioid
    Frequency Response 40 Hz – 20 KHz
    Sensitivity (dBV/Pa) -59 dBV/Pa
    Weight 72 g
    Output Impedance 2400 Ω
    @ 1 kHz
    Signal-To-Noise Ratio 55 dB
    @ 1 kHz
    Maximum SPL 153.0 dB
    1000 Ω load, @ 1% THD
    Dynamic Range 114.0 dB
    @ 1 kHz, 1000 Ω load
    Equivalent Output Noise 39 dB
    Typical, A-Weighted
    Power Requirements +5 V DC (nominal), 10 V maximum (DC bias)
    Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
    Cable 1.1 m (45 in.)
    Connector TA4F
       
    BLX1 Bodypack Transmitter
    Transmitter Type Bodypack
    Audio Input Level gain max  -16 dBV maximum
    gain min (0 dB) +10 dBV maximum
    Gain Adjustment Range 26 dB
    Input Impedance 1 MΩ
    RF Transmitter Output 10 mW, typical
    varies by region
    Dimensions 110 mm x 64 mm x 21 mm (H x W x D)
    Weight 75 g (2.6 oz.), without batteries
    Housing Molded ABS
    Power Requirements 2 LR6 AA batteries, 1.5 V, alkaline
    Battery Life 8 up to 14 hours (alkaline)
       
    BLX4R Single Channel Half-Rack Receiver
    Output Impedance XLR connector: 200 Ω
    6.35 mm (1/4") connector: 50Ω
    Audio Output Level
    Ref. ±33 kHz deviation with 1 kHz tone
    XLR connector: –20.5 dBV (into 100 kΩ load)
    6.35 mm (1/4") connector: –13 dBV (into 100 kΩ load)
    RF Sensitivity -105 dBm for 12 dB SINAD, typical
    Image Rejection >50 dB, typical
    Dimensions 50 mm X 198 mm X 163 mm H x W x D
    Weight without antennas 998 g (2.2 lb.)
    Housing Molded ABS, steel
    Power Requirements 12–15 V DC @ 260 mA, supplied by external power supply (tip positive) 
       

  • Downloads