ULXD4Q Quad Channel Digital Wireless Receiver

	ULXD4Q Quad Channel Digital Wireless Receiver The Shure ULXD4Q Quad Channel Digital Wireless Receiver offers four channels of uncompromising audio quality, RF signal stability, and advanced setup features in a rugged single rack unit.
The Shure ULXD4Q Quad Channel Digital Wireless Receiver offers four channels of uncompromising audio quality, RF signal stability, and advanced setup features in a space-efficient single rack unit. Rugged yet lightweight and compact, the 1RU all-metal chassis houses four independent receivers, each with their own audio and RF meters, gain control, and XLR outputs that can be either direct or summed for flexible signal routing. At only 7.6 pounds, the ULXD4Q offers space savings in the rack and cost savings when shipping. With RF cascade and two Ethernet ports, units can easily share RF signal and be networked together for simplified frequency coordination and deployment. For networked audio applications, DANTE digital networking allows multiple channels of audio over a single Ethernet cable. Combined with the suite of features and benefits ULX-D Digital Wireless Systems offer, the ULXD4Q is truly generations ahead of any other available receiver in its class, and brings a new level of performance and scale to professional sound reinforcement.
Features
Four receivers in a rugged 1RU metal chassis with internal power supply Individual gain controls, LED meters, and XLR outputs for each channel Up to 72 MHz tuning range (region dependent) Digital predictive switching diversity High Density mode optimizes ULX-D systems to simultaneously operate significantly more channels in applications up to 30 meters RF cascade ports allow distribution of RF signal to another unit Optimized scanning automatically finds, prioritizes, and deploys the cleanest frequencies to transmitters over IR sync Bodypack Frequency Diversity ensures uninterrupted audio for mission-critical applications AES 256-bit encryption-enabled for secure transmission Audio summing routes two or more audio channels to combinations of receiver outputs. Use each channel’s gain adjustment to reach the desired mix. DANTE® digital networked audio over Ethernet Ethernet networking for streamlined frequency coordination and deployment across multiple receivers Interference detection and alerts provided on both the receiver and WWB6 Up to 60 dB independently adjustable gain for each channel Wireless Workbench® 6 software integration for advanced coordination, monitoring, and control Compatible with AMX/Crestron control Compatible with the AXT600 Axient™ Spectrum Manager Intuitive front panel LCD menu and controls with lockout feature Upgraded LCD with adjustable contrast and brightness Audio and RF LED meters with peak indicator Switchable mic/line output level Remoteable ½ wave antennas

Technical Data

Dimensions	197 mm x 171 mm x 42 mm (7.75 in. x 6.75 in. x 1.65 in.), H x W x D
Weight	913 g (2.0 lbs), without antennas
Housing	Galvanized Steel
RF Input
Spurious Rejection	>80 dB, typical
Connector Type	BNC
Impedance	50 Ω
Bias Voltage	12 – 13 V DC, 170 mA maximum, per antenna
Audio Input
Gain Adjustment Range	-18 to +42 dB in 1 dB steps (plus Mute setting)
Configuration	1/4” (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -)
Impedance	1/4” (6.35 mm): 100 Ω (50 Ω Unbalanced) XLR: 100 Ω
Full Scale Output	1/4” (6.35 mm): +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
Mic/Line Switch	30 dB pad
Phantom Power Protection	1/4” (6.35 mm): Yes XLR: Yes
Networking
Power Over Ethernet (PoE)	No, protected
Network Interface	Single Port Ethernet 10/100 Mbps
Network Addressing Capability	DHCP or Manual IP address
Maximum Ethernet Cable Length	100 m (328 ft)

Downloads

	ULXD Wireless System User Guide English
	ULXD Wireless System Quick Start Guide English
	ULXD Wireless System Brochure English