PGX14 Wireless Guitar System

 

pgx14

PGX14 Wireless Guitar System

The Shure PGX 14 Guitar Wireless system offers superior wireless technology and automatic set-up features. The system comprises of a PGX1 bodypack transmitter with a WA302 instrument cable and a PGX4 Diversity receiver.

 

Fast and easy setup, even for a beginner

Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.

How many musicians can use this system simultaneously?

A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.

I normally plug my guitar straight in to my amp. Will the wireless affect the sound?

The PGX system uses Shure’s patented Audio Reference Companding which makes the system sound just like a wired setup. With less noise and greater dynamic range than other wireless 

 

 

WT_PGX_1

PGX1 Bodypack Transmitter UHF
Designed to meet the needs of traveling performers, the Shure PGX1 can be used with headworn, lavalier, or instrument microphones, or with guitars or basses.

The PGX1 wireless bodypack transmitter includes automatic setup features, a single power/mute switch and an LED indicator showing power, mute and battery status. 2 x AA batteries (included) gives you 8 hours of continuous use and it has an operating range of 92m.

This transmitter requires the PGX4 receiver to complete the system.

Features
  • 92 m operating range
  • Includes mute switch and battery power warning lights
  • The frequency Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
  • More than eight hours of continuous use with two AA batteries

pgx4

PGX4 Wireless Diversity Receiver
The Shure PGX4 receiver offers superior wireless technology, automatic set-up features and Shure's patented Audio reference companding.

The Shure PGX4 receiver makes wireless setup simple. With features like Automatic Frequency Selection and Automatic Transmitter Setup, the PGX4 offers the best in wireless to performers on the go. It also includes Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

The PGX4 receiver is used as part of the PGX wireless series which includes various handheld, headset and lapel mic options.

Features
  • Compact and robust UHF receiver
  • Easy to use, no prior wireless experience necessary
  • Automatic frequency selection with a touch of a button.
  • Audio Reference Companding for exceptional audio performance
  • Microprocessor controlled diversity
  • ¼ wave antennas
   

  • Technical Data

    PGX1 Bodypack Transmitter UHF
    Transmitter Type Bodypack
    Dimensions 108 mm H x 64 mm W x 19 mm D
    Battery, endurance 2 AA, > 8 h
    Weight 81 g
       
    PGX4 Wireless Diversity Receiver
    Power Supply PS21UK
    Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
    Weight 327 g (11.5 oz.)
    Housing ABS
    Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): –19 dBV
    1/4 inch connector (into 3000 Ω load): –5 dBV
    Output Impedance XLR connector: 200 Ω
    1/4 inch connector: 1kΩ
    XLR output Impedance balanced
    Pin 1: Ground (cable shield)
    Pin 2: Audio
    Pin 3: No Audio
    Sensitivity –105 dBm for 12 dB SINAD, typical
    Image Rejection >70 dB, typical
    Power Requirements 12–18 Vdc at 150 mA, supplied by external power supply
       

  • Downloads